Need help?Do you have a question about the Absen KL II Series and is the answer not in the manual?
General| Contrast Ratio | 5000:1 |
|---|---|
| Life Span | 100, 000 hours |
| Resolution | Varies depending on the model and configuration |
| Viewing Angle | 160° (H) / 160° (V) |
| Refresh Rate | 3840Hz |
| Weight | Varies depending on the model |
| Cabinet Size | Custom based on configuration |
| Cabinet Material | Aluminum alloy |
| Module Maintenance | Front & Rear Maintenance |
| Color Temperature | Adjustable |
| Storage Temperature | -20°C~60°C |
| Power Supply | AC100~240V |
| Control System | NovaStar/Brompton |
| Certifications | CE, FCC, RoHS |
| Pixel Pitch | 2.5mm |
| Humidity | 10% |
Lists key features and capabilities of the KL II Series LED video walls.
Details technical specifications like pixel pitch, dimensions, brightness, and refresh rate.
Provides detailed dimensions and diagrams for the LED panel.
Shows the dimensions and front view of an individual LED module.
Identifies and illustrates various parts of the LED panel, including ports and connectors.
Details optional accessories for wall mounting and rigging installation.
Lists and pictures essential tools required for the installation process.
Specifies optimal temperature and humidity conditions for installation and operation.
Outlines critical safety measures and procedures before and during installation.
Instructions and accessories for installing the LED cabinets on a ground structure.
Steps and accessories for mounting the LED cabinets onto a wall.
Guidelines for suspending LED cabinets using hanging beams.
Instructions on installing decorative trim pieces around the screen edges.
Explains power cord selection and distribution box specifications for connecting cabinets.
Demonstrates how to connect power cables between cabinets and to the power source.
Details how to connect network cables for video signal transmission.
Describes how to test power and signal connections after wiring.
Lists tools used for maintenance and module replacement.
Step-by-step guide for removing and replacing faulty LED modules.
Procedures for maintaining or replacing internal electronic components.
General guidelines and safety measures for maintenance tasks.
Common faults and their solutions for diagnosing and fixing issues.
To Next Page
