27
Check for Power Supply Short Circuit
After completing the cabinet wiring, please use a multimeter to check if there is any
short circuit at the AC input power supply (L / N / PE) and DC output terminal (VCC /
GND). If there is a short circuit, please carefully investigate the wirings. Make sure all
wirings are normal, and only then connect power to operate the unit.
All rights reserved by Shenzhen Absen Optoelectronic Co., Ltd.
Shenzhen Absen Optoelectronic Co., Ltd. reserves the rights to modify contents without any further notice.
To Previous Page
Loading...
Need help?
General
