Absen PL Lite Series User Manual

PL Lite Series User Manual - 29 -
All rights reserved by Shenzhen Absen Optoelectronic Co., Ltd.
Shenzhen Absen Optoelectronic Co., Ltd. reserves the rights to modify contents without any
further notice.
out;
3. Check whether the power supply has no output;
4. Check the data cable of the receiving card;
5. Replace the data cable;
6. Send the rcfg file;
7. Upgrade the firmware version of the receiving card;
8. Replace the receiving card;
4
Chromatic
aberration
between
modules
1. Check whether the module power plug is well plugged;
2. Replace the flat cable;
3. Replace the power supply;
4. Replace the module;
5. Replace the receiving card;
5
All panels
display the
same content
1. Set the screen connection on software;
2. Check whether the data port is wrong.
6
No control
system
detected
1. Check the USB cable;
2. Check whether the computer USB port is malfunctioning;
3. Update the USB driver;
4. Replace the USB cable;
5. Replace the sending card;
7
No
multi-function
card detected
1. Check whether the distribution box is in the automatic state;
2. Check whether the multi-function card is powered;
3. Replace the power supply of the multi-function card;
4. Check whether the main data cable is inserted into the wrong
data port;
5. Check whether the sending card data port is malfunctioning;
6. Re-add the multi-function card;
7. Replace the multi-function card;
8. Replace the sending card;
8
No full screen
display
1. Check whether the setting of the playback window is normal;
2. Check the output resolution of the video processor;
3. Check the output window of the video processor;

Absen PL Lite Series Specifications

General

Brand	Absen
Model	PL Lite Series
Category	Monitor
Language	English