6. Make sure the unit is switched off, i.e. the LCD display is OFF. If
you accidentally switch the unit on, please press and hold the ON/OFF
button for 3 seconds to switch it off again.
7. Place the new AbTronicX2 dual channel belt around your stomach
or any other area you want to exercise and close the belt to a
comfortable, but tight fit with the Velcro belt (not too tight).
Tip! If you are wearing the belt around your stomach you can make the
LCD display easier to read by pressing the “Flip Display Button”. This
will rotate the display 180 degrees for easy reading.
8. We recommend starting with the upper abs and upper back, placing
the belt above your belly button.
9. Switch the unit on by pressing the ON/OFF
button once.
The LCD display will light up and show some display.
10. Use the PROGRAM
button to toggle through the menu:
Mode
Power
Timer
Repeat
10
To Next Page
Loading...