Power with 10 Intensity Levels
IMPORTANT:
The maximum difference between front and back channel is 5 levels.
The unit will auto adjust the 2
nd
channel if the difference becomes
larger.
Push the UP/DOWN button for each channel to increase or decrease
the intensity level. Level 1 is the first intensity you can feel. The pre-
set value is 0 after choosing your program in the mode setting. You will
notice a tingling sensation prior to the muscle contracting. Once the
muscle is contracting you will feel pleasant and relaxed. Adjust the
intensity according to your comfort level. You should feel a strong but
comfortable contraction of the muscles.
The intensity level has 10 steps per channel. With every push of the
button UP/DOWN you increase / decrease the intensity by one step.
You can set different intensity levels for front and back exercises
adjusted to the individual levels you feel most comfortable with
IMPORTANT:
The AbTronicX2 unit has several built-in safety features:
A) AUTO OFF: After approximately 10 minutes, the AUTO OFF
function will turn off the unit, if it is not in use
B) FAILSAFE: The unit will not work if you are not wearing it, if
there is not enough conducting gel present or no load is
connected
C) ALARM: in case of B) the unit will sound a beeping alarm
D) KEYLOCK TOGGLE ON/OFF: Press and hold the function key
for 3 seconds
12
To Next Page
Loading...