88
FTP user name: Enter the user name from the FTP server account.
FTP password: Enter the password from the FTP server account.
FTP server port: Enter the FTP port of the server. The default for the FTP port is 23.
Path: If necessary, enter another path (subfolder on the FTP server).
FTP mode: Port: Active FTP mode
PASV: Passive FTP mode
Create a folder: If this function is enabled, the camera automatically places sub-
folders on the FTP server with date (for example:
folder/20160527/121032m.avi).
10.4.3 Overlay text
This function allows certain text, the date and time to be superimposed on to the video.
Activate overlay text: ticking the checkbox activates the function.
Date: superimposes the date
Time: superimposes the time
Text activated: activation of text
Text: assignment of text. Up to a maximum of 16 characters can be
assigned. Permissible characters are: A-Z, a-z, 0-9
10.4.4 Date/time
Current date and time: the current date and time settings are displayed here.
Time zone: select the time zone in which the camera is located.
Enable daylight savings time: by ticking the checkbox, you are confirming that the location
in which the camera is installed takes part in daylight savings
time.
Auto: the camera automatically uses the switch-over times
every year.
Manual: manual switch-over time settings.
NTP server synchronisation: tick the box for the camera to automatically obtain the date
and time from a server (please note: the NTP server does
not hold any information on the summer/winter time
changeover).
NTP server: enter the domain name or the IP address of the time server
here.
NTP update interval: update interval for the date and time with the server. An
update also takes place when the camera is restarted.
PC time synchronisation: when you save, the date and time from the connected client
PC are adopted.
Manual: manual assignment of date and time
To Next Page
Loading...
