66
RTSP SDP
Note: This request requires viewer access privilege Method: GET/POST
Syntax:
http://<servername>/viewer/<0~(n-1)>/<network_accessname_<0~(m-1)>> rtsp://<servername>/<0~(n-
1)>/<network_accessname_<0~(m-1)>>
“n” is the channel number and “m” is the stream number.
You can get the SDP by HTTP or just describe by RTSP protocol directly. For detailed streaming
protocol, please refer to “control signaling” and “data format” documents.
To Next Page
Loading...
