Abus TV7230 - Page 269

64
fimage=<file name>[&return=<return page>]\r\n \r\n <multipart encoded form data>
Server will accept the upload file named <file name> to be upgraded the firmware and return with <return page> if
indicated.
IP filtering
Note: This request requires administrator access privilege Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>] [&return=<return page>]
PARAMETER VALUE DESCRIPTION
Method addallow Add a set of allow IP address range to server. Start and end
parameters must be specified. If the index parameter is specified, it
will try to add starting from index position.
adddeny Add a set of deny IP address range to server. Start and end
parameters must be specified. If the index parameter is specified, it
will try to add starting from index position.
deleteallow Remove a set of allow IP address range from server. If start and
end parameters are specified, it will try to remove the matched IP
address. If index is specified, it will try to remove the address from
given index position. [start, end] parameters have higher priority
then the [index] parameter.
deletedeny Remove a set of deny IP address range from server. If start and
end parameters are specified, it will try to remove the matched IP
address. If index is specified, it will try to remove the address from
given index position. [start, end] parameters have higher priority
then the [index] parameter.
start <ip address> The start IP address to add or to delete.
end <ip address> The end IP address to add or to delete.
index <value> The start position to add or to delete.