Abus TV7230 - Page 41

41
http://<servername>/cgi-bin/viewer/getparam.cgi?[<parameter>] [&<parameter>…]
http://<servername>/cgi-bin/operator/getparam.cgi?[<parameter>] [&<parameter>…]
http://<servername>/cgi-bin/admin/getparam.cgi?[<parameter>] [&<parameter>…]
where the <parameter> should be <group>[_<name>] or <group>[.<name>] If you do not
specify the any parameters, all the parameters on the server will be returned. If you specify only
<group>, the parameters of related group will be returned.
When query parameter values, the current parameter value are returned.
Successful control request returns paramter pairs as follows.
Return:
HTTP/1.0 200 OK\r\n Content-Type: text/html\r\n Context-Length: <length>\r\n \r\n
<parameter pair>
where <parameter pair> is <parameter>=<value>\r\n [<parameter pair>]
<length> is the actual length of content.
Example: request IP address and its response
Set server parameter values
Note: The access right depends on the URL directory. Method: GET/POST
Syntax:
http://<servername>/cgi-bin/anonymous/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>…][&update=<value>][&return=<return page>]