Abus TVIP41550 - Page 288

288
http://<servername>/cgi-bin/viewer/getparam.cgi?[<parameter>]
[&<parameter>…]
http://<servername>/cgi-bin/operator/getparam.cgi?[<parameter>]
[&<parameter>…]
http://<servername>/cgi-bin/admin/getparam.cgi?[<parameter>]
[&<parameter>…]
where the <parameter> should be <group>[_<name>] or <group>[.<name>] If you do not specify the any parameters, all
the parameters on the server will be returned. If you specify only <group>, the parameters of related group will be
returned.
When query parameter values, the current parameter value are returned. Successful
control request returns paramter pairs as follows.
Return:
HTTP/1.0 200 OK\r\n Content-
Type: text/html\r\n Context-Length:
<length>\r\n
\r\n
<parameter pair>
where <parameter pair> is
<parameter>=<value>\r\n
[<parameter pair>]
<length> is the actual length of content.
Example: request IP address and it’s response
Request:
http://192.168.0.123/cgi-bin/admin/getparam.cgi?network_ipaddress
Response:
HTTP/1.0 200 OK\r\n Content-
Type: text/html\r\n Context-
Length: 33\r\n
\r\n network.ipaddress=192.168.0.123\r\n