68
Motion Detection
Window Name: Name of the motion area. Different actions can be assigned later to different motion
areas.
: Adds a motion area. Max. 3 areas can be defined. Press this button and draw a
rectangle in the lower video image using the left mouse key.
: Removes a motion area. Press this button and click on a motion area in the lower video
image using the left mouse key.
Enable: Checking this box activates the corresponding motion area.
Sensitivity (Day): Sensitivity value for the motion area in day mode.
Sensitivity (Night): Sensitivity value for the motion area in night mode. Image noise in night mode requires
different sensitivity settings.
Threshold: Percentage of the image that must change before motion is detected.
Detect Status: The display shows the trigger status of the motion area.
Green – No motion alarm has been triggered.
Red – A motion alarm has been triggered in the corresponding window.
To Next Page
Loading...
