Abus TVIP62500 - Administration

73
Information
MAC address: Display of the MAC address of the camera (hardware address of the network
interface)
Model name: Camera model (item number)
Firmware version: Display of the firmware version installed
LED
Activate status LED Ticking the selection box activates the status LED on the front side of the network
camera.
On: LED activated
Off: LED deactivated
Flashing: The LED flashes at a frequency of 1 flash per second.
Administration
Configuration for saving/loading
Save: Save the configuration file on the client PC
Loading: Load the configuration file
Restore: The network camera can be reset to the factory settings using this menu item.
Retain network settings: Tick this selection box to reset all the parameters to the default settings, with
the exception of the network settings.
Restart: If you press the “Restart” button, the camera will be restarted.
Update firmware: The firmware on the network camera can be updated using this menu item.
The most recent firmware is available on the ABUS Security-Center homepage
(http://www.abus.com). Download this firmware to your computer first.
Ensure that the power supply and network connection to the camera are not
disconnected under any circumstances during the entire update process.
The camera system can be damaged in this way.
Logs
Refresh: Press this button to update the log file display.
Save Log Message: Option of saving the log file into a text file.