70
Action
Actions available:
Send e-mail notification
Action active: Ticking the selection box activates the action
E-mail template: Selection of the e-mail event server (receiver)
Subject: Entry of a subject
Contents: Input of the content of the notification
Send HTTP notification
Action active: Ticking the selection box activates the action
HTTP server: Selection of the HTTP event server (HTTP target server)
Parameter: Parameter which is received by the HTTP event server
Message: Content of the parameter
Send TCP notification
Action active: Ticking the selection box activates the action
TCP server: Selection of the TCP event server (TCP target server)
Message: Value which is transmitted to the TCP event server
Send images via FTP
Action active: Ticking the selection box activates the action
Server: Selection of the previously configured FTP event server
Pre-alarm buffer: Tick the selection box to send pre-alarm images
Trigger interval: Set the pre-alarm duration
Frame rate: Set the number of frames per second to be recorded during the pre-alarm time
Post-alarm buffer: Tick the selection box to send post-alarm images
Trigger interval: Set the post-alarm duration
Frame rate: Set the number of frames per second to be recorded during the post-alarm time
Send images via e-mail
Action active: Ticking the selection box activates the action
Server: Selection of the previously configured e-mail event server
Pre-alarm buffer: Tick the selection box to send pre-alarm images
Trigger interval: Set the pre-alarm duration
Frame rate: Set the number of frames per second which are recorded during the pre-alarm time
Post-alarm buffer: Tick the selection box to send post-alarm images
Trigger interval: Set the post-alarm duration
Frame rate: Set the number of frames per second which are recorded during the post-alarm time