12.3.2.1. TCP/IP
To be able to operate the camera via a network, the TCP/IP settings must be configured correctly.
NIC Settings
DHCP
If a DHCP server is available, click on "DHCP" to apply an IP address and other network settings
automatically. The data is transferred automatically from the server and cannot be changed manually.
If no DHCP server is available, please enter the following data manually.
IPv4 Address
Setting of the IP address for the camera
IPv4 Subnet Mask
Manual setting of the subnet mask for the camera
IPv4 Default Gateway
Setting of the default router for the camera
93
To Next Page
Loading...
