84
10. Configuration
10.1 Local configuration
Under the 'Local Configuration' menu item, you can select settings for the live view, file paths of the
recordings and snapshots.
Live view parameters
Here you can set the protocol type and the live view performance of the camera.
Protocol
TCP:
Complete provision of streaming data and high video quality; however, this affects real-time
transmission is affected.
UDP:
Real-time audio and video transmission.
MULTICAST:
Use of the multicast protocol (the network components must support multicast). Additional
multicast settings can be found under Configuration/Network.
HTTP:
Provides the same quality as TCP; however, special ports are not configured under the
network settings.
Live view performance
You can set the performance level for the live view here.
Rules
As soon as this function has been enabled, a frame will be displayed around the triggered area in the live
image for used and triggered motion detection.
Image format
Setting of the format in which the single frame from the live view (Instant image button) should be saved
(JPEG, BMP).
To Next Page
Loading...
