Camera
Video Loss
Select the camera channel to be processed under “Cam-
era”.
Tick the Enable Video Loss box and define any other
parameters under Settings as required.
Arming Time Schedule tab
Here you set the times at which the reactions set in the
Linkage Action tab are triggered.
4. Select the day and enter the time schedule.
Note
Up to eight time slots, between 00:00 and 00:00,
can be defined in each case, but the individual
time slots must not overlap.
5. Under Copy, select whether or not the setting should
be applied to every day of the week and the holiday
settings.
6. Confirm the settings by clicking on Apply and exit
the menu by clicking on OK.
Linkage Action tab
Here you can configure the response of the recorder dur-
ing an event (e.g. motion detected) by ticking the corre-
sponding box.
Parameter Notifications
Full Screen Monitoring
The camera is displayed in
full screen in live view.
Audible Warning The device does not have an
audible warning.
Notify Surveillance Cen-
tre
The CMS sends out a warn-
ing message.
Send Email An email is sent to a speci-
fied email
page31
Trigger Alarm Output The alarm output is triggered
in the event of an alarm.
• Confirm the settings by clicking on Apply and exit
the menu by clicking on OK.
42
To Next Page
Loading...
