Abus TVVR45030 - Camera Selection Keys - Status Led

Status displays
111
Status displays
General information
The following status displays indicate the current operat-
ing state:
 LEDs on the front of the device
 Acoustic signal tones
 Icons (display elements) on the monitor
Note
Pay attention to the information in the separate
quick guide.
DVR status LED
State
Function
White (constantly lit):
System status is OK
White (flashing):
System status is OK, recording
settings are stored, surveillance
mode is active
Blue (constantly lit):
At least one camera is currently
recording
Red (constantly lit):
System maintenance required
Camera selection keys – status LED
State
Function
Off:
No camera connected
White (constantly lit):
Camera is connected
Blue (constantly lit):
Camera is currently recording
Displays on the monitor
The device shows the date and time, camera name and
whether a recording is in progress.
 Continuous recording: Blue “R”
 Alarm recording: Red “R”
 Motion recording: Yellow “R”