Abus TVVR45030 - Settings - Configuration; User; General

Settings - Configuration
122
Settings - Configuration
Note
The “Configuration” menu is used to manage all
device settings.
Warning
Ensure that the date and time are set correctly.
IMPORTANT:
Subsequent changes to the settings can lead
to data loss!
Ensure a data backup has been made in good
time beforehand.
Overview
Menu
Setting
Page
General
Language, video, time, date,
mouse pointer, password, time
zones and other settings
122
Network
Required network settings
(manual IP, DHCP, PPPOE,
DDNS etc.)
124
Alarm
Assignment and parameterisa-
tion of detectors to alarm inputs
and relay outputs
125
RS-232
Parameters on the serial con-
nection
130
Live View
Display settings and assign-
ment of the event output
130
Warning
Behaviour of the device in ex-
ceptional cases
(HDD full, network discon-
nected etc.)
130
User
Adding and changing users,
assigning authorisation rights
130
Note
Pay attention to the instructions in the correspond-
ing sections.
General
“General” tab
Setting
Language
Language on the OSD
CVBS Output
Standard
PAL / NTSC
Resolution
Resolution on the monitor
Time Zone
GMT (Greenwich Mean Time)
Date Format
MM-DD-YYYY, DD-MM-YYYY,
YYYY-MM-DD
System
Date/Time
Date and time
Mouse Pointer
Speed
Set on the scroll bar (left =
low speed; right = high speed)
Enable Wizard
Box not ticked:
Wizard will not appear after restart of
the device.
Box ticked:
Wizard will appear after restart of the
device.
Enable ID Au-
thentification
Box not ticked:
In order to enter a menu no password
has to be entered. At access by net-
work the password has to be entered.
Box ticked:
Password must be entered in order to
use the menu.