15
CONTROLLER MODES
Pressing the mode button will cycle through the controller’s available programming modes: OFF,
ON, CO
2
(Center and Zone), Fan (Center and Zone), and CYCLE (On and Off). Make sure to use
the appropriate mode for the device you’ve plugged in (ex. CO
2
mode for CO
2
generator).
ON MODE
Your device(s) will switch on regardless of CO
2
levels or time-based triggers.
OFF MODE
Your device(s) will switch off regardless of CO
2
levels or time-based triggers.
Jump back to OFF Mode anytime by holding the
MODE button while in other modes or settings.
PROGRAMMING
To Next Page
Loading...
