Need help?Do you have a question about the AC Infinity CONTROLLER 69 and is the answer not in the manual?
General| Model Number | CONTROLLER 69 |
|---|---|
| Outlets | 4 |
| Display | LCD |
| Power Input | 100-240V AC |
| App Compatibility | AC Infinity App (iOS and Android) |
| Sensors | Temperature, Humidity |
| Mounting | Wall Mountable |
| Wireless Connectivity | Wi-Fi |
| Control Modes | Schedule |
Automation controls based on climate conditions, timers, and schedules.
Mount on steel surfaces or use kickstand for desktop placement.
Bluetooth connection to AC Infinity app for automations and climate data.
LCD shows temperature, humidity, device levels, trends, and time.
Connect up to four devices for simultaneous or independent programming.
Includes °F/°C, clock, calibrations, and custom transitions.
Plug UIS connector into controller and sensor probe into 3.5mm jack.
Plug into AC outlet and use ties/screws for cord management.
Secure anchors, twist screws, and hang controller using back holes or magnet.
Route cords through grooves and open kickstand for desktop placement.
Connect up to four fans simultaneously using the controller's ports for power and control.
Accessory to connect 2 or 4 devices with a single port, expanding connectivity options.
Connect up to four grow lights simultaneously using the controller's ports for power and control.
Connect fans with 4-pin Molex connectors to the controller via the adapter.
Connect devices at a distance with extension cables or expansion dongles.
Identifies and describes buttons (PORT, MODE, SETTING, UP/DOWN) and display areas for control.
Explains selecting ALL ports or INDIVIDUAL ports for programming devices.
Details the functions and behavior of OFF and ON modes for device operation.
Configures HIGH and LOW temperature triggers for AUTO mode activation.
Configures HIGH and LOW humidity triggers for AUTO mode activation.
Explains TIMER TO ON and TIMER TO OFF modes for timed device operation.
Sets ON and OFF durations for devices to cycle continuously.
Sets daily ON and OFF clock-time schedules for device operation.
Adjusts display brightness, auto-dimming, and toggling the display on/off.
Changes displayed units (°F/°C) and adjusts the current clock time.
Adjusts temperature and humidity readings for sensor probe accuracy.
Adjusts transition threshold for level changes in AUTO mode temperature triggers.
Adjusts transition threshold for level changes in AUTO mode humidity triggers.
Explains alert icons and specific alerts like ADVANCE PROGRAMMING, AUTO MODE, TIMER ALERTS.
Displays Bluetooth status, lock alerts, and temperature/humidity alarms.
Resets controller to factory settings or locks parameters to prevent changes.
Hides the screen display or jumps to OFF Mode.
Resets current mode values to OFF or zero.
Automatically increases or decreases user settings.
Describes the main device page, MASTER CONTROL toggle, and port views in the app.
Details app features like MODE BUTTON, CONTROL WHEEL, SLIDERS, CONTROLS TAB, DATA TAB, HISTORY LOG.
Explains entering the Controls tab and navigating controller modes via the menu.
Using wheel hands, steppers, sliders for parameters and toggles for climate triggers.
Creating automated activations, alarms, and push notifications, and editing programs.
Creating automation programs by setting time, mode, and parameters.
Creating alarm programs with various modes and temperature/humidity triggers.
Creating notification programs for fan activity and climate events.
Viewing temperature/humidity trends over time using fluctuation charts.
Visualizing temperature and humidity distribution using bar graphs.
Reviewing controller activity, filtering by function, and viewing logs.
Set device name, temperature units, and screen brightness.
Adjust transition levels and calibrate temperature/humidity readings.
To Next Page
