26
PROGRAMMING
CALIBRATION TEMPERATURE SETTING
Adjusts the temperature reading the sensor
probe is measuring. Press the up or down
button to increase or decrease the data figure
in 2°F (or 1°C) increments. The calibration
cycle ranges from -20°F to 20°F (or -10°C to
10°C) and will be applied to the sensor probe’s
measurements.
CALIBRATION HUMIDITY SETTING
Adjusts the relative humidity reading the sensor
probe is measuring. Press the up or down
button to increase or decrease the data figure
in 1% increments. The calibration cycle ranges
from -10% to 10% and will be applied to the
sensor probe’s measurements.
To Next Page
Loading...
