Need help?Do you have a question about the AC Infinity CONTROLLER 75 and is the answer not in the manual?
General| Brand | AC Infinity |
|---|---|
| Model | CONTROLLER 75 |
| Category | Controller |
| Language | English |
Instructions for plugging the sensor probe into the controller's 3.5mm port.
Steps to plug the controller into a wall outlet to power it on.
Guidance on installing anchors and screwing them into the wall for mounting.
Explanation of the Outlet, Mode, Up/Down, and Setting buttons.
Simultaneous programming for all plugged-in devices.
Setting individual programming for each connected device.
Keeps the device off regardless of environmental triggers or time.
Keeps the device on regardless of environmental triggers or time.
Device turns on above a set high temperature and off below it.
Device turns on below a set low temperature and off above it.
Device turns on above a set high humidity and off below it.
Device turns on below a set low humidity and off above it.
Sets a countdown for the device to turn on after being off.
Sets a countdown for the device to turn off after being on.
Sets continuous ON and OFF durations for the device.
Sets daily clock times for the device to turn ON and OFF.
Adjusts sensor probe temperature readings by ±20°F or ±10°C.
Adjusts sensor probe humidity readings by ±10%.
Sets a buffer to prevent rapid ON/OFF switching for high temperatures.
Sets a buffer to prevent rapid ON/OFF switching for low temperatures.
Sets a buffer to prevent rapid ON/OFF switching for high humidity.
Sets a buffer to prevent rapid ON/OFF switching for low humidity.
To Next Page
