Need help?Do you have a question about the AC Infinity CONTROLLER 67 and is the answer not in the manual?
General| Model | CONTROLLER 67 |
|---|---|
| Output Voltage | 12V DC |
| Temperature Range | 32°F to 122°F (0°C to 50°C) |
| Sensors | Temperature and Humidity Sensor |
| Mounting | Wall Mountable |
| Control Channels | 4 |
| Sensor Ports | 1 |
| Power Supply | 100-240V AC |
| Display | LCD |
| Wireless Connectivity | Wi-Fi |
| Compatible Devices | AC Infinity fans |
| UPC | 850000000000 |
Controller is compatible with AC Infinity fan models that have an EC-motor.
Controller is not compatible with AC or DC motor fan models.
Features automation controls for fan activation based on temperature, humidity, timer, and schedules.
Locate the fan's molex connector and plug it into the controller's fan port.
Locate the sensor probe's connector and plug it into the controller's sensor port.
Fan remains off; sets minimum speed for other modes.
Fan runs continuously at the set speed, serving as maximum speed for other modes.
Fan activates based on high temperature thresholds; ramps up to ON mode speed.
Fan activates based on high humidity thresholds; ramps up to ON mode speed.
Sets a countdown timer for the fan to turn on at the ON mode speed.
Configures continuous on/off cycling with specified durations for each phase.
Adjusts temperature readings by increments of 2°F or 1°C.
Adjusts humidity readings by increments of 1%.
Resets the controller to factory defaults, clearing all user settings.
To Next Page
