AC Infinity CONTROLLER 67 User Manual

19
PROGRAMMING
CALIBRATION TEMPERATURE SETTING
In this setting, adjust the temperature reading
that the sensor probe is measuring. Press the
up or down button to increase or decrease the
data figure by 2°F (or 1°C) increments. The
calibration cycle ranges from -8°F to 8°F (or
-4°C to 4°C) and will be applied to the sensor
probe’s measurements.
CALIBRATION HUMIDITY SETTING
In this setting, adjust the real humidity
reading that the sensor probe is measuring.
Press the up or down button to increase or
decrease the data figure by 1% increments.
The calibration cycle ranges from -8% to
8% and will be applied to the sensor probe’s
measurements.
CLOCK SETTING
In this setting, adjust the current clock time.
Press the up or down button to increase or
decrease the time. Once you cycle through
12:00 each time, the units will automatically
change to AM or PM. The current clock time
will be shown at the top right corner of display.

AC Infinity CONTROLLER 67 Specifications

General

Brand	AC Infinity
Model	CONTROLLER 67
Category	Controller
Language	English