11
PROGRAMMING
1. MODE BUTTON
This button cycles through each of the controller’s mode: OFF, ON, AUTO (4 triggers), TIMER TO
ON, TIMER TO OFF, CYCLE (On and Off), and SCHEDULE (On and Off).
4. PROBE TEMPERATURE
Current temperature that the probe is detecting. Displays “--“ if no probe is plugged in. Includes a
trend indicator that signals a rise, steady, or fall in temperature within the last hour.
3. SETTING BUTTON
This button cycles through each of the controller’s settings: DISPLAY BRIGHTNESS, F/C, CLOCK,
CALIBRATION (Temperature and Humidity), and TRANSITION (Temperature and Humidity).
2. UP / DOWN BUTTON
Adjusts the parameters of the mode that you are in. In most modes, the up button increases and
down button decreases the setting. Holding both buttons simultaneously sets the parameters to off.
21 3
HIGH TEMP.
LOW TEMP.
AUTO
AM
PM
HIGH HUMID.
LOW HUMID.
TO
ON
4
5
6
7
8
9
10
11
To Next Page
Loading...
