AC Infinity CONTROLLER 69 User Manual

21
TIMER TO ON MODE
Pressing the up or down button sets a countdown
time. Once the timer ends, the devices will trigger
to run at the level set in ON Mode. If there is a level
set in OFF Mode, the devices will run at that level
during the countdown.
The countdown will begin if no buttons are pressed
for 5 seconds. The time left on the countdown is
displayed below the current level. Leaving the timer
mode while the countdown is running will pause it
until you return to this mode.
If there is a level set in OFF Mode other
than zero, the devices will run at that
level when triggered to turn off.
PROGRAMMING
TIMER TO OFF MODE
Pressing the up or down button sets a countdown
time. The devices will run at the level set in ON
Mode until the countdown ends. If there is a level
set in OFF Mode, the devices will run at that level
after the end of the countdown.
The countdown will begin if no buttons are pressed
for 5 seconds. The time left on the countdown is
displayed below the current level. Leaving the timer
mode while the countdown is running will pause it
until you return to this mode.
If there is a level set in OFF Mode other
than zero, the devices will run at that
level when triggered to turn off.

AC Infinity CONTROLLER 69 Specifications

General

Model Number	CONTROLLER 69
Outlets	4
Display	LCD
Power Input	100-240V AC
App Compatibility	AC Infinity App (iOS and Android)
Sensors	Temperature, Humidity
Mounting	Wall Mountable
Wireless Connectivity	Wi-Fi
Control Modes	Schedule