AC Infinity CONTROLLER 69 User Manual

22
CYCLE MODE (ON AND OFF)
Set an on duration and an off duration for the
devices to cycle through continuously. Press the up
or down button to first set a duration for the devices
to activate. Then press the mode button again and
set a duration for the devices to deactivate.
When the devices are activated, they will run at
the level set in ON Mode. When the devices are
deactivated, they will run at the level set in OFF
Mode.
The countdown will begin if no buttons are pressed
for 5 seconds. The time left on the countdown
before the next ON or OFF phase is displayed
below the current level. Leaving the cycle mode
while the countdown is running will pause it until
you return to this mode.
If there is a level set in OFF Mode other
than zero, the devices will run at that
level when triggered to turn off.
PROGRAMMING

AC Infinity CONTROLLER 69 Specifications

General

Model Number	CONTROLLER 69
Outlets	4
Display	LCD
Power Input	100-240V AC
App Compatibility	AC Infinity App (iOS and Android)
Sensors	Temperature, Humidity
Mounting	Wall Mountable
Wireless Connectivity	Wi-Fi
Control Modes	Schedule