15
PROGRAMMING
ALL OUTLETS
Navigate to the ALL outlet to set simultaneous
programming for all plugged in devices.
Programming set in this outlet mode applies to
all plugged in devices, but will not be active if
you navigate to other outlets. Re-entering the
ALL outlet will resume its programming.
INDIVIDUAL OUTLET
Navigate to a numbered outlet with a plugged in
device to set individual programming.
Programming will run in the background even
while you navigate to other numbered outlets.
OUTLETS
Pressing the outlet button will cycle through the controller’s available outlets: ALL, 1, and 2. Dot
indicates the current outlet.
To Next Page
Loading...
