AC Infinity CONTROLLER 79 User Manual

33
OTHER SETTINGS
JUMP TO OFF MODE
Holding the mode button for 3 seconds while in any mode or
setting will automatically jump to OFF Mode. This function is
disabled if the controller is locked.
CONTROLLER LOCK
Holding the setting button will lock the controller in your
current mode. While your controller is locked, no parameters
may be adjusted, nor will you be able to switch modes.
Holding the setting button again will unlock the controller.
HOLD +
HIDE SCREEN
Lock the controller so no settings can be adjusted. See
above. Then press the setting button to turn the display off.
Pressing it again will turn the display back on. Programs will
still run in the background while the LCD screen is off.
PRESS +
RESET TO OFF/DEFAULT
Holding the up and down buttons together for 2 seconds will
reset the value of your current mode or controller setting
to OFF/Default. Pressing either the up or down button will
return to the previous value.
HOLD +
HOLD +
AUTO INCREASING OR DECREASING
Holding the up or down button will increase or decrease the
user setting automatically until you release them.
HOLD +
HOLD +
FACTORY RESET
Holding the mode, up, and down buttons together for
5 seconds will reset your controller and restore factory
settings. This clears all user parameters in each controller
mode and setting.
HOLD +

AC Infinity CONTROLLER 79 Specifications

General

Brand	AC Infinity
Model	CONTROLLER 79
Category	Controller
Language	English