AC Infinity CONTROLLER 79 User Manual

28
BUFFER SETTING (LOW TEMPERATURE TRIGGERS)
For Low Temperature Triggers, this buffer figure will
create a trigger-off point above your set trigger point. For
example, if you had set the Low Temperature Trigger at
50°F and set the Temperature Buffer at 4°F. Then your
device will trigger on when it meets or falls below 50°F,
and only trigger off when it rises above 54°F. The 54°F
figure is obtained by taking your Low Temperature Trigger
of 50°F and adding your temperature buffer of 4°F.
PROGRAMMING

AC Infinity CONTROLLER 79 Specifications

General

Brand	AC Infinity
Model	CONTROLLER 79
Category	Controller
Language	English