6. Put the meter on a flat surface. Point the two IR windows toward each other. They
should be 3 to 10 cm apart.
7. Do not move the infrared cable
(computer), PDA or meter during the
transfer.
8. Follow the prompts on the software.
9. The software program may shut off
the meter automatically when the data
transfer is complete.
Notes:
If the data did not transfer successfully, try again. If you still have problems, call the •
Accu-Chek Customer Careline on 0800 701 000 (UK) or 1 800 709 600 (ROI).
To make the most of the download feature, you must set the time and date in the •
meter correctly.
To find out more about downloading your results and what tools are available, visit •
our website at www.accu-chek.co.uk.
51