Transferring Data Directly to a Computer or PDA Using
Specialized Software and an Infrared Cable
Visit our website at www.accu-chek.co.uk or call the Accu-Chek Customer Careline
on 0800 701 000 (UK) or 1 800 709 600 (ROI) for software and IR cable.
Infrared (IR)
Window
You can transfer your stored results to a computer to track,
identify patterns and print.
1. Install the software according to the instructions. To
transfer the results to a computer, connect the infrared
cable according to the instructions.
2. Run the software program and follow the instructions
about how to download information. Make sure the
software is ready to accept data from the meter.
3. With the meter off, press and hold both
and until
two arrows on the display alternately flash.
4. Locate the infrared (IR) window on the top of the meter.
5. Locate the IR window on either the infrared cable
(computer) or PDA.
50
To Next Page
Loading...
Need help?
General
