35
Meter Memory, Setup, and Data Transfer
5
Setup
Setting the Hypoglycemic Alert
WARNING
• This function is no substitute for hypoglycemia training by your healthcare professional.
• Before you set the hypoglycemic alert, talk to your healthcare professional to help you decide what
blood glucose level is your hypoglycemic level.
Press and release
to
turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and hold
until
set-up appears on the
display.
Press and release
repeatedly until set-up,
OFF, and the flashing
appear on the display.
Press and release
or
to switch between On
and OFF.
Press and release
to
set your choice.
If you select On, set-up
appears and
flashes.
Press and release
or
to adjust the level.
Press and release
to
set the level.
To exit, press and hold
until the flashing test strip
symbol appears on the
display.
The set-up mode is
complete.
1 2 3 4
51801_07021933001.indb 35 5/7/14 8:53 AM
To Next Page
Loading...
