48
8
Technical Information
Electromagnetic Compatibility – This meter meets the electromagnetic immunity requirements as per
ENISO15197 AnnexA. The chosen basis for electrostatic discharge immunity testing was basic standard
IEC61000-4-2. In addition, the meter meets the electromagnetic emissions requirements as per EN61326.
The meter’s electromagnetic emission is thus low. Interference from the meter to other electrically-driven
equipment is not anticipated.
Performance Analysis – Refer to the test strip package insert.
Test Principle – Refer to the test strip package insert.
Product Safety Information
WARNING
• Strong electromagnetic fields may interfere with the proper operation of the meter. Do not use the
meter close to sources of strong electromagnetic radiation.
• To avoid electrostatic discharge, do not use the meter in a very dry environment, especially one in
which synthetic materials are present.
Travel Documentation
If you are traveling on a commercial airline, you may be required to provide documentation certifying that
this meter meets environmental conditions and test procedures for Airborne Equipment (RTCA/DO-160F)
section21 Emission of Radio Frequency Energy. Visit accu-chek.com or contact the ACCU-CHEK Customer
Care Service Center at 1-800-858-8072 to obtain a copy of the document.
51801_07021933001.indb 48 5/7/14 8:53 AM
To Next Page
Loading...
