18
The ACCU-CHEK Softclix Lancing Device
3
Inserting a Lancet
You must first insert a lancet into the lancing device to get it ready for use.
1
Remove the cap.
Insert a new lancet until it
clicks firmly into place.
2
Twist off the lancet’s
protective cover.
3
Slide the cap on until it
stops by aligning the
notch on the cap with the
notch on the lancing
device.
51801_07021933001.indb 18 5/7/14 8:52 AM
To Next Page
Loading...
