48
6. Hold the meter so the
test strip points down-
ward at a slight angle.
7. Gently touch and hold
the droplet to the front
edge of the test strip on
the black notch.
Do not pull the bottle
away until the
is displayed and the
meter beeps.
Running a Control Test
49
Control Testing
The test starts as soon as the
test strip has the correct amount
of solution. If the beep signal is
turned on, the meter will beep
when the test begins.
The on the display
gradually disappears while
the test is being performed.
The test result appears and
is stored in the memory
automatically.
▲ EXAMPLE
To Next Page
Loading...
