Accu-Chek Inform II Quick Reference Guide

17
7. Slide the test strip into the test
strip port as far as it will go in
the direction indicated by the
arrows on the test strip.
8.
Wait until the flashing drop
appears in the screen before
applying the blood.
How to Perform Patient Testing
Patient Testing

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing