Accu-Chek Inform II Quick Reference Guide

32
1. Press the On/Off button to
power on the meter.
2. Once the Power Up screen
appears, touch
to proceed
to the Operator ID screen, or
wait 5 seconds and the meter
automatically proceeds to the
Operator ID screen.
3. Enter or barcode scan operator
ID, then touch to display
the
MainMenu 2 screen.
Storing Test Strip Lot Information

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing