Accu-Chek Inform II Quick Reference Guide

21
Control Testing
How to Perform Control Testing
Glucose control tests should
be run in the following
circumstances:
•Before using the meter for the
patient testing the first time
•At the glucose control intervals
established by your facility, if
established
•When using a new test strip
vial for the first time
•When using a new test strip
lot for the first time (and as a
result a new test strip code)
•If a test strip vial was left open

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing