Accu-Chek Inform II Quick Reference Guide

22
How to Perform Control Testing
•If questionable test results are
displayed repeatedly
•If you wish to test the
performance of the system
In addition, the following events
can be specified during setup as
a reason for a glucose control
test:
•If a previous control test is out
of range
•If glucose control tests were
not run at the proper intervals

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing