Accu-Chek Inform II Quick Reference Guide

8
QC Lockout occurs when
•patient testing is attempted and
controls have not been run in
the time interval or frequency
designated by your institution.
•controls have been run but the
control values were not in range.
Error messages appear to alert you
to a condition that needs attention.
Take the action suggested on screen
to resolve the problem, touch
,
and proceed with testing.
General Information

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing