16
1. Wash and dry your hands.
You need the meter, a test strip, a lancing device, and a lancet.
4. Insert the test strip into the
meter in the direction of the
arrows.
The meter turns on. A test
strip symbol and a flashing
blood drop symbol appear on
the display.
5. Perform a fingerstick with the
lancing device.
2. Prepare the lancing device.
3. Check the use by date on the
test strip container. Do not
use test strips past the use
by date.
50705_05853397002_EN.indb 16 4/24/12 8:32 AM
To Next Page
Loading...
