EasyManuals Logo

Accu-Chek Performa User Manual

Accu-Chek Performa
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
17
6. Gently squeeze your finger to
assist the flow of blood.
This helps you get a blood
drop.
NOTE
After a successful test, the meter turns off 5 seconds after the test strip is removed.
or
7. Touch the blood drop to the
front edge of the yellow
window of the test strip. Do
not put blood on top of the
test strip.
When you see
flash, there is
enough blood in the test strip.
8. The test result appears on
the display. Leave the test
strip in the meter to mark
a special event (see the
next section, Marking Blood
Glucose Results). Otherwise,
remove and discard the used
test strip.
50705_05853397002_EN.indb 17 4/24/12 8:32 AM

Table of Contents

Other manuals for Accu-Chek Performa

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Accu-Chek Performa and is the answer not in the manual?

Accu-Chek Performa Specifications

General IconGeneral
Sample Size0.6 µL
Test Time5 seconds
Meter Dimensions94 x 52 x 21 mm
Measurement Range0.6-33.3 mmol/L
Memory Capacity500 results
Battery Type1 x CR2032 lithium coin cell
Automatic Power Off90 seconds after last user action
Operating Humidity10 to 90% RH
Storage Conditions10% to 90% RH
Meter Weight59 g (with battery)

Related product manuals