Acer 486 - Page 25

System Board 1-25
Table 1-9 System Error Messages (continued)
Error Message Corrective Action
Memory Error Check SIMMs on the system board.
Contact your dealer.
Memory Size Mismatch Run Setup.
Serial 1 Conflict Run Setup.
Disable onboard serial 1.
Serial 2 Conflict Run Setup.
Disable onboard serial 2.
Parallel Conflict Run Setup.
Disable onboard parallel port.
Pointing Device Error Check and connect the pointing
device. Contact your dealer.
Pointing Device Interface
Error
Contact your dealer.
Press F1 key to continue
or Ctrl-Alt-Esc for Setup
Press F1 or Ctrl-Alt-Esc.
Press F1 to Setup or
other key to continue
Press F1 and reconfigure the system.
Press Esc to turn off NMI,
any key to reboot
Press Esc to disregard NMI error.
Press any key to reboot the system.
Protected Mode Test Fail Contact your dealer.
RAM BIOS Error Contact your dealer.
RAM Parity Error Check SIMMs on system board or
contact your dealer.
Real Time Clock Error Run Setup.
Shadow RAM Fail Contact your dealer.
System Memory Address
Error
Check SIMMs on system board or
contact your dealer.