2-57 System Utilities
Crisis Utility SOP
When to Use the Crisis S.O.P?
• When the system hangs while updating BIOS.
• When power failure occurs and the system shuts down while updating BIOS.
• When the system cannot boot normally after updating BIOS (i.e. a black screen appears
without a POST logo, etc.).
Creating a USB Flash Crisis Disk
To create a Crisis USB flash disk, perform the following:
1. On a machine with Windows OS, plug in a USB flash disk.
2. Launch Windows Explorer, the USB flash disk is shown as a “Removable Disk”. Right-click the
mouse on the USB flash disk, then select Format to format the USB disk.
Figure 2-103. Format USB Flash Disk (1 of 2)
To Next Page
Loading...
