Acer A315-53G - Security Tab (Windows 10)

System Utilities 2-8
Security Tab (Windows 10)
The Security tab allows the user to configure and protect the computer from unauthorized use.
Figure 2-4. BIOS Security (Windows 10)
Table 2-13. BIOS Security Tab Parameters (Windows 10)
Product Information Example Remark
Supervisor Password [Set] / [Clear]
This field indicates if the Supervisor Password
is set or not. By default the value is [Clear].
• [Set]: Supervisor Password is set
• [Clear]: Supervisor Password is not set
User Password [Set] / [Clear]
This field indicates if the User Password is set
or not. By default the value is [Clear].
• [Set]: User Password is set
• [Clear]: User Password is not set
F1 Help Select Item F5/F6 Change Val ue s F9 Setup Defaults
Esc
Exit
Select Menu
Enter Select
► Sub-Menu F10
Save and Exit
InsydeH20 Setup Utility Rev. 5 .0
Supervisor Password Is: Clear
User Password Is: Clear
HDD0 Password Is: Clear
HDD1 Password Is: Clear
Set Supervisor Password [Enter]
Set User Password [Enter]
Set HDD0 Password [Enter]
Set HDD1 Password [Enter]
Password on Boot [Disabled]
Secure Boot Mode: Standard
Erase all Secure Boot: [Enter]
Select an UEFI file as [Enter]
for executing :
Restore Secure Boot to [Enter]
Factory Default :
Current TPM (TCM) State : Install
Change TPM (TCM) State : [Enable]
Clear TPM (TCM) : [Clear]
Information Main Advanced Security Boot Exit
Item Specific Help
Supervisor Password controls access
to the whole setup utility. It can be
used to boot up when Password on
boot is enabled.