5-26 Service and Maintenance
8. Attach the four (4) screws to secure the HDD module to the lower case.
NOTE: Screw torque force = 1.5~2.0kgf.cm
Figure 5-33. Securing the Screws
9. Install the HDD door (see HDD Door Installation on page 5-13).
Table 5-13. HDD Module & HDD Carrier Screws
Screw Name Screw Type Torque Quantity
M 2.0 x 3.0
1.5~2.0kgf.cm
4
M 3.0 x 3.0
2.5~3.0kgf.cm
4
To Next Page
Loading...
