2-23 System Utilities
3. On the Exit menu, choose “YES” on Exit Saving Changes. The system will save changes
and reboot.
4. The system will reboot and enter Shell environment from the USB disk. Find the location of the
“Removable HardDisk” in the device mapping table and open that path. In the following
example, the “Removable HardDisk” is located at “fs1:”. To open the path, use cd shell
command. .
Figure 2-20. Navigating the Folder
5. Execute the file “C5V01100S.efi” to unlock Intel ME after what the system will automatically
reboot.
Figure 2-21. Unlocking Intel ME
EFI Shell version 2.40[21793.40]
Current running mode 1.1.2
Device mapping table
fs0 :HardDisk - Alias hd27a0a1 blk0
PciRoot(0x0)/Pci(0x13,0x0)/Sata(0x0,0x0,0x0)/HD(1,GPT,96CBFE01-4E78-
fs1 :Removable HardDisk - Alias hd28e0b0b blk1
PciRoot(0x0)/Pci(0x14,0x0)/USB(0x4,0x0))/USB(0x1,0x0)/HD(1,MBR,0x009
Shell> fs1:
fs1:\>cd shell
fs1:\Shell>
!
Shell> fs1:
fs1:\>cd shell
fs1:\Shell> C5V01100S.efi
_
To Next Page
Loading...
