2-29 System Utilities
6. After the automatic reboot the system begins with secure flash.
Figure 2-35. Start Secure Flash
NOTE:
While flashing BIOS on Secure flash window, do not remove the AC power source. If the
warning message below is shown, check if the AC power is plugged in.
Figure 2-36. AC Detect Error
_______________________Please do not remove the AC power!
Insyde H2OFFT (Flash Fireware Tool) Version 1.00.55.00
Copyright © 2016, Insyde Software Corp. All Rights Reserved.
Loading New BIOS Image File: Done
Loading New EC Image File: Done
_____________ __Current BIOS Model name : C5V01
______________ _New_____BIOS Model name : C5V01
_______________ Current System BIOS version: V1.XX
_______________________Please do not remove the AC power!
Insyde H2OFFT (Flash Fireware Tool) Version 1.00.55.00
Copyright © 2016, Insyde Software Corp. All Rights Reserved.
Loading New BIOS Image File: Done
Loading New EC Image File: Done
_____________ __Current BIOS Model name : C5V01
______________ _New_____BIOS Model name : C5V01
_______________ Current System BIOS version: V1.XX
_______________ New_____System BIOS version: V1.XX
Requires AC power to avoid an accidental power off
To Next Page
Loading...
