System Utilities 2-44
To update the DMI Pool, perform the following:
1. In Windows OS, copy āDMITOOLSx86.exeā to the Tools directory of a WinPE3.0/4.0 System
Disk.
Figure 2-66. Copy File
NOTE:
Above path is an example only.
2. On the target device, boot to WinPE3.0/4.0 Server and execute DMITOOLSx86.exe to display
the usage options help.
The following examples show the commands and the corresponding output information:
1. Read Manufacturer Name from Memory
[Instruction] DMITOOLSx86 /Rm
Figure 2-67. Read Manufacture Name
Copy
COMPAL ELECTRONICS, INC.
DMITOOLS
DMITOOLSx86.exe
C:\>DMITOOLSx86 /Rm
================================================================
COMPAL ELECTRONICS INC. V2. 0. 0. 7
Author : STD SID TEAM.
WARNING: THIS PROGRAM IS FOR INTERNAL USE ONLY.
Copyright c 2012 COMPAL ELECTRONICS INC. All rights reserved.
================================================================
Manufacturer : Acer
To Next Page
Loading...
